Dial-up settings

Select Dialup networking from the Start menu, via Programs then Accessories. NT will install dial-up networking software off the CD-ROM.

Restart.

Copy the dial-up script, ntannex.scp, to c:\Winnt\system32\ras\ntannex.scp. Select Dialup networking again. Create a new phone number, then when the Dial-up Networking window appears again, click on the More button and select Edit Entry and Modem properties. Here are bean's settings:

Basic
Phone number	6427654
Use telephony dialing properties	Off
Dial using	IBM Thinkpad 28.8 MWave data fax
Use another port if busy	Off
Mwave hardware features	Hardware flow control: on Modem error control: on Modem compression: off
Server
Dialup server type	PPP: Windows NT
Network protocols	TCP/IP: on IPS/SPX: off NetBEUI: off
Software compression	Off
PPP LCP Extensions	On
PPP TCP/IP Settings
Server-assigned IP address	On
Server assigned name server address	Off
Primary DNS	128.32.136.12
Secondary DNS	128.32.136.9
Primary WINS Server	128.32.134.168
Secondary WINS Server	128.32.134.169
Use IP header compression	On
Use default gateway on remote networks	On
Script
Run this script	d:\winnt\system32\ras\NTANNEX.SCP
Security
Accept only encrypted authentication	On

Plug into the nearest phone line and try it! Note: when you dial, enter your PPP user name and password, not your Unix or NT user name and password.