Make the floppy and then run a:\installn
. I installed in
c:\utility\Thinknt
. Uncheck the "Install Personalization Editor"
option, otherwise you will be asked for a "DOS/Personalization" disk,
which I don't know where to get...
Open the Thinkpad Configuration program and make sure that the audio and internal modem are enabled. The COM Port by default is set to 2, which works fine.
Make the two floppies, insert the first, and run a:\setup
.
I installed in c:\utility\mwave
.
After completion, open the Ports control panel and add
COM Port 2 to the list. Use the following settings:
I/O Port Address | 02F8
|
Interrupt Request Line | 3 |
FIFO Enabled | Yes |